T.38 support for HylaFax Enterprise Edition

Today I have been experimenting with HylaFax Enterprise Edition and the Dialogic Brooktrout SR140. The HylaFax EE has support for SQL database, T.38 and/or barcode recognition on top of the features available with the Open-Source version of HylaFax. The Dialogic software emulates hardware interfaces like the Dialogic Brooktrout TR1034 for the HylaFax Server, this makes Hylafax almost completely independent from the interface used. Unfortunately the HylaFax server leaves a lot of fax signal handling up to the hardware/software interface, so you may only use interfaces that can handle/produce these signals on-board, which reduces the choice, the load on the system’s CPU but it also increases the maximal number of channels that may be handled by one system, unfortunately this also increases the costs. Continue reading “T.38 support for HylaFax Enterprise Edition”

Fritz!Box latest firmware xx.04.70

The latest AVM Fritz!Box firmware currently available for the models

  • Fritz!Box WLAN 3270
  • Fritz!Box Fon WLAN 7170
  • Fritz!Box Fon WLAN 7270

brings interesting new features. The most interesting for me are the internal SIP Registrar Server and the support for USB HSDPA modems. Continue reading “Fritz!Box latest firmware xx.04.70”

Thomson ST 585 bridging in routing mode

EPT uses the Thomson ST 585 as ADSL Modem for their IPTV offer. EPT loads a special configuration onto the Thomson, which splits the 4 port Ethernet switch into 2 partitions. Ports 3&4 are bridged to an extra ATM path and channel (VCI/VPI) which gives access to the IPTV platform and network. Ports 1&2 give access to the Internet, by default the Thomson connects via PPPoE to the Internet. Continue reading “Thomson ST 585 bridging in routing mode”

AVM to support T.38 on all Fritz!Box models

According to a good friend of mine at AVM, all the latest firmwares add T.38 support to all of the Fritz!Box models. Unfortunately I was only able to test the following models so far and confirm that T.38 actually works:

patch for chan_ss7 to support all HEX signs

I created this small patch for chan_ss7 to make it support all available HEX signs. The digits 0 to 9 and the characters B, C and E were already supported. Ok F as well but this indicates the end of the dial process.

diff chan_ss7-0.10.1/l4isup.c chan_ss7-0.10.1-mcs/l4isup.c Continue reading "patch for chan_ss7 to support all HEX signs"