EPT releases new price list and products

On May 15, 2010 EPT will apply a new price list. The changes I found are:

  • calls to EMSAT (+8213) will be rated at 3,00 EUR (previously 1,8394 EUR)
  • calls to IRIDIUM (+8816, +8817) will be rated at 3,50 EUR (previously 1,8394 EUR)
  • a new product LuxFibre, based on FTTH, is added to the offering, bandwidths available are 30/2, 50/4 and 100/6 Mbps
  • a Voice over Ethernet product, limited to 1 or 3 concurrent calls, calls are rated at the same as for POTS and ISDN lines

According to the documents available to the alternative operators clearly indicate that the VDSL and FTTH based services are available without POTS or ISDN lines.

EPT is offering the LuxFibre access product with a Fritz+Box 7570 VDSL, but be aware that the telephony services provided by EPT will probably disable all access to alternative VoIP operators from that Fritz!Box.

EPT finally rolling out new bandwidth settings to DSL subscribers [UPDATE]

In January 2010 P&T Luxembourg announced new bandwidth profiles for their LuxDSL product. Having access to 3 different DSL connection at 3 different locations, I was waiting for the update to arrive on the connections. Some P&T Luxembourg subscribers were contacted that the DSL equipement used on their connection is unable to function properly after 2nd Frebruary 2010, I got one of these letters for a location which still didn’t get the new bandwidth profiles. Currently 1 of the 3 locations got the new bandwidth profiles. Continue reading “EPT finally rolling out new bandwidth settings to DSL subscribers [UPDATE]”

EPT brings new bandwidth profiles for their ADSL products

The EPT website has been updated to reflect new bandwidth profiles for their ADSL products. Some pages announce speeds of:

  • 5 Mb/s downstream & 512 kb/s upstream (formerly 2 Mb/s & 192 kb/s)
  • 10 Mb/s downstream & 640 kb/s upstream (formerly 8 Mb/s & 256 kb/s)
  • 20 Mb/s downstream & 768 kb/s upstream formerly 15 Mb/s & 384 kb/s)

Continue reading “EPT brings new bandwidth profiles for their ADSL products”

Thomson ST 585 with Alzheimer’s disease

It does happen arbitrary, but my Thomson ST 585 looses it’s configuration completely each time there is a power outage. It happened just a few days ago to me again. Of course configuring a PPPoE connection on the Tomson ST 585 isn’t very hard, but the IPTV connection is currently undocumented. EPT can update the configuration via the remote administration feature of the Thomson ST 585, but it takes some time, which is really annoying. I think I will need to document how to setup the IPTV configuration without the help of the EPT helpdesk. Unfortunately my lab network is currently not available so I will have to wait until after my trip to southern France.

AVM to support ADSL Annex A and Annex B in a single box

It’s probably already widely known, but I though I might mention it once more.

AVM currently offers the international edition of the FRITZ!Box Fon WLAN 7270 with support for ADSL Annex A and Annex B in one single box. So you don’t have to buy an other Fritz!Box when you change your phone line from analog to ISDN or vice-versa. Unfortunately the GUI seems to be only in English, all the fancy features like WLAN 802.11n (300 Mbit/s), DECT-GAP Base Station and SIP Registrar server should however outweight this limitation.

Thomson ST 585 bridging in routing mode

EPT uses the Thomson ST 585 as ADSL Modem for their IPTV offer. EPT loads a special configuration onto the Thomson, which splits the 4 port Ethernet switch into 2 partitions. Ports 3&4 are bridged to an extra ATM path and channel (VCI/VPI) which gives access to the IPTV platform and network. Ports 1&2 give access to the Internet, by default the Thomson connects via PPPoE to the Internet. Continue reading “Thomson ST 585 bridging in routing mode”