The Fritz!Box supports HD Voice with voipGATE.

It was time again to re-install my Fritz!Box, unfortunately the box does crash sometimes and only a factory reset brings the broken services back to life (in between those crashes the box actually runs very solid).

So I setup all of my local services and DECT phones and concluded with the setup of my VoIP accounts. While testing ingress calls I noticed a nice HD icon on my DECT phones’ display. The Fritz!Box GUI surely lists my test calls with Codec G.722.

FB-G722

I have tested HD Voice with voipGATE.

Why T.38 is not the solution

As VoIP gets more and more popular, it’s users are struggling how to deal with their existing needs for fax services. Some may just connect their fax machine to an analog telephone adapter (aka ATA) and send their fax transmissions via their ITSP. While some may experience random success with this setup, most will experience an unacceptable high failure rate. The T.38 protocol was thought to be THE solution for fax over VoIP as T.38 uses data packets instead of analog modulation but it has its share of issues as well.

So what is the problem? Continue reading “Why T.38 is not the solution”

LuxFibre disables alternative VoIP services?

UPDATE: Recent Fritz!Box OS allow to choose between Internet or Voice VLAN when configuring VoIP accounts. See AVM provides workaround to use 3rd party ITSPs. The statements below are obsolete.

Yes it does, unfortunately.

So why exactly? The short answer is, because the VoIP part of the Fritz!Box is moved to an isolated virtual LAN (VLAN) with no Internet access, so the Fritz!Box VoIP part cannot reach any alternative VoIP services as these are somewhere on the Internet.

But why is this necessary? The LuxFibre product is designed to provide all services over IP. This includes any telephone services (analogue, ISDN) which were previously delivered directly via copper. Telephony over IP cannot Continue reading “LuxFibre disables alternative VoIP services?”

EPT releases new price list and products

On May 15, 2010 EPT will apply a new price list. The changes I found are:

  • calls to EMSAT (+8213) will be rated at 3,00 EUR (previously 1,8394 EUR)
  • calls to IRIDIUM (+8816, +8817) will be rated at 3,50 EUR (previously 1,8394 EUR)
  • a new product LuxFibre, based on FTTH, is added to the offering, bandwidths available are 30/2, 50/4 and 100/6 Mbps
  • a Voice over Ethernet product, limited to 1 or 3 concurrent calls, calls are rated at the same as for POTS and ISDN lines

According to the documents available to the alternative operators clearly indicate that the VDSL and FTTH based services are available without POTS or ISDN lines.

EPT is offering the LuxFibre access product with a Fritz+Box 7570 VDSL, but be aware that the telephony services provided by EPT will probably disable all access to alternative VoIP operators from that Fritz!Box.